Air-tight testing machine for cylinder bottom

QM40 air-tight testing machine for cylinder bottom introduction:

QM40 cylinders air-tight testing machine is based on GB12137-2002 "cylinder pressure tightness testing method". It is designed according to the cylinder manufacturer's need and cylinder testing station manufacturing and maintenance needs and it is used to test and maint the gas cylinders which meet safety supervision code standard after regular use. The device through the mechanical and electrical joint action, can test the air-tight for the gas cylinder bottom after scraping. This is special equipment to test the cylinder's pressure tightness by coated with test liquid. Give the air to the test pressure of the cylinder in dispute parts with test fluid, observe whether bubble continuous evolution. The time with liquid dwell is not less than 1 min. This equipment is suitable for the air tightness test of seamless cylinder, welding gas cylinder, liquefied petroleum gas cylinder and dissolved acetylene cylindersby the liquid coating method.

The firm structure, reliable performance, advanced technology, convenient operation, greatly saves labor strength, is cylinder manufacturer, gas detection unit the necessary equipment. Equipment is no pit form, the company independent development and design of efficient environmental protection special equipment, test fluid can realize recovery recycling, intelligent design, easy operation, can improve the operating environment, reduces the labor intensity, improve labor efficiency.

The equipment can be according to the cylinder diameter size adjustment lifting device height, the bottom to scrape the bottom of the cylinder blank for bottom air test of special equipment. The characteristics of long service life, easy operation etc, can improve the overall quality of the cylinder and the production efficiency. This equipment is mainly composed of frame, translation device, lifting equipment, top tight device, baffle device, turn device, hydraulic system, electrical control components.

With manual single action function, has urgent stop switch, realize the emergency shutdown, equipment failure and alarm function. Working condition are equipped with corresponding indicator indicating working condition.

Workflow:

The cylinder is made up of convey table along the axial into the inspection station - damper mechanism fall - lifting device lifting - top tight airtight telescopic cylinder top tight to open the compressed air, air tightness test bottle bottom and top tight oil cylinder return - lifting device return to baffle institutions rises - table transfer from the cylinder and discharge repeat the above operation.